10 Freedom Xi Owner’s Guide
Freedom Inverter Configuration
To adjust the low battery shutdown setting:
By default the low battery shutdown voltage setting is set to
Low (“”).
1. Press and hold the Inverter P
ower button for five seconds.
2. Press the Inverter Power button until the
LED screen flashes
“” intermittently.
3. Press the Select button once.
The LED screen will display the prese
nt (or most recent) low
voltage setting. For example, “” is for a low shutdown
voltage setting.
low setting = 10.5 V
middle setting = 11.8 V
high setting = 12.1 V
4. Continue pressing the Select button to cycle through the three
–
“”, “” and “” settings until you reach the desired
setting.
5. Press and hold the Select button for five seconds to make the
settin
g permanent.
To return all feature settings to factory default settings:
1. Press and hold the Inverter Power button for five seconds.
2. Press the Inverter Power button until
the LED screen flashes
“” intermittently.
3. Press and hold the Select button for
five seconds to return all
feature settings to their factory default settings.
Freedom XI Owners Guide.book Page 10 Friday, September 18, 2015 2:57 PM
To Next Page
Loading...
Need help?
General