Xantrex RV Series Inverter/Charger Owner’s Manual
20
Search Sense Mode Operation with Stacked Pairs
When two RV inverters are stacked the search control on the master unit will determine how
much load must be present to “wake-up” both inverters. As a result, loads that will be used to
bring the inverters out of search mode must be wired to the master unit’s 120 VAC output or
across both units’ 240 VAC output. See “Search Sense Mode Using Optional RC7 Remote” on
page 5 for operation of the search sense mode control.
To Next Page
Loading...
Need help?
General