975-0400-01-01 v
Important Safety Instructions
General Safety Instructions
• All electrical work must be done in accordance with local, national, and/or
international electrical codes.
• Before installing or using this device, read all instructions and cautionary
markings located in (or on) this guide, the unit, the batteries, PV array, and
any other equipment used.
• This product is designed for indoor mounting only. Do not expose this unit to
rain, snow or liquids of any type.
• To reduce the chance of short-circuits, use insulated tools when installing or
working with the unit or any DC source (such as PV, hydro, wind, or
batteries).
• Remove all jewelry when installing or working with the unit or any DC
source. This will greatly reduce the chance of accidental exposure to live
circuits.
• The unit contains more than one live circuit (batteries and PV array). Power
may be present at more than one source.
• This product contains no user-serviceable parts.
Battery Safety Information
• Always wear eye protection when working with batteries.
WARNING
This manual contains important safety instructions that should be followed during the
installation and maintenance of this product. Be sure to read, understand, and save these
safety instructions.
WARNING: Limitations on use
The XW Solar Charge Controller is not intended for use in connection with life support
systems or other medical equipment or devices.
WARNING
A battery can produce the following hazards to personal safety:
• electrical shock
• burn from high-short-circuit current
• fire or explosion from vented gasses.
Observe proper precautions when working with or around batteries.
To Next Page
Loading...
