Xerox 4112 - Page 22

Page 22 Xerox 4127/4112 PDL Reference Guide
Feature Implementation Values
“@DAID = string3”
allowedOnly) as password without encryption.
It can be null (zero length string)
Where string3 is a maximum of 32 character
(ASCII characters in the range 20h - 7Eh are
allowedOnly) as account ID. It can be null
(zero length string)
Note:Auditron and JBA cannot be used at the
same time. So the same command works for
both modes.
Auditron @PJL SET JOBATTR =
“@JOAU = string1”
@PJL SET JOBATTR =
“@JOAP = string2”
@PJL SET JOBATTR =
“@DAID = string3”
Where string1 is a maximum of 32 character
(
ASCII characters in the range 20h - 7Eh are
allowedOnly
) as job owner (Capital character & small
character is distinguished)
Where string2 is a maximum of 12 character
(ASCII characters in the range 20h - 7Eh are
allowedOnly) as password without encryption.
It can be null (zero length string)
Where string3 is a maximum of 32 character
(ASCII characters in the range 20h - 7Eh are
allowedOnly) as account ID. It can be null
(zero length string)
Note:Auditron and JBA cannot be used at the
same time. So the same command works for
both modes.
Delay Print @PJL SET JOBATTR =
“@PRTM =
YYYY:MM:DD:hh:mm”
YYYY:MM:DD:hh:mm
YYYY: year(AD 2000～2099)
MM: month (1～12)
DD: day (1～31)
hh: hour(0～23)
mm: minute(0～59)
Banner Sheet @PJL SET JOBATTR=
“@BANR=value”
@PJL SET JOBATTR=
“@BCMT=comment string”
Where value is one of the following:
START: start sheet
DEVICE: depend on device setting
OFF: no banner sheet
Where string is a maximum of 255 character
( ASCII characters in the range 20h - 7Eh are
allowedOnly
) as comment for banner.