Xerox 4112 User Manual (English)

Other manuals for Xerox 4112

User Guide436 pages

Instruction Manual46 pages

System Administration Guide380 pages

Pdl Reference Guide28 pages

User Guide Supplement20 pages

Overview8 pages

Questions and Answers:

A
alejandrobuckleyAug 21, 2025
How to fix communication issues with Xerox All in One Printer?
- C
  Carla KelleyAug 21, 2025
  If you are experiencing communication issues with your Xerox All in One Printer, it might be due to the computer and the machine using different protocols. To fix this, configure both the machine and each computer to use the same SMB operational protocol. Also, if the machine and computers are on different networks (subnets), consult your network administrator. Additionally, the host name for the machine might already be in use. You can use CentreWare Internet Services to change the host name to a unique name or initialize the machine settings to the default settings.
T
Tyler RileyAug 23, 2025
What to do if Xerox 4112 All in One Printer is not printing?
- K
  Kimberly MorganAug 25, 2025
  If your Xerox All in One Printer is not printing, one reason could be that the machine is currently processing a request from another computer, especially if it's set to Non-Spool mode. You can either wait until the machine finishes the current print job or change the machine setting to Spool mode. Another potential cause is that the number of connections to the machine has exceeded the maximum allowed. In this case, wait for a while before retrying to print.
W
warrendonaldAug 28, 2025
How to fix unexpected print output on Xerox All in One Printer?
- P
  phernandezAug 28, 2025
  If the print output from your Xerox All in One Printer is not what you expected, it might be because the print language of the print data and the print language configured on the machine are different. To resolve this, ensure that the print language of the print data matches the print language configured on the machine.
J
Janet BassAug 30, 2025
What to do if my Xerox 4112 All in One Printer is not printing as expected?
- C
  Christopher PowellAug 30, 2025
  If your print output isn't what you expect, it might be because the selected print language on the machine doesn't match the print language of the print data. To resolve this, select the print language on the machine to match the print data. Also, ensure that your computer uses the print driver supplied with the machine. If you're using a print driver from another company, select the print driver supplied with the machine on the computer. If it does not appear on the selection list, install the print driver supplied with the machine and select it. Note that operation is not guaranteed if another print driver is used.
C
Casey GarciaSep 1, 2025
What to do if my Xerox 4112 All in One Printer won't print?
- K
  Kenneth Ramos DVMSep 1, 2025
  If your Xerox All in One Printer won't print, it could be because the machine is processing a request from a different computer, particularly if the machine is set to Non-Spool mode. Wait until the machine finishes processing the print job, or change the machine setting to Spool mode. Alternatively, the number of connections to the machine might have exceeded the maximum allowed. In this case, wait for a while and retry printing.
A
Anne JohnsonSep 4, 2025
What to do if I cannot delete documents from the Xerox 4112 window?
- M
  Mrs. Sherry SteinSep 4, 2025
  If you are unable to delete documents from the Printer window on your Xerox All in One Printer, it could be because you're trying to delete all print data, which is restricted to the system administrator. To resolve this, select specific print data and delete it from the Document menu (Cancel Printing menu). Alternatively, the print data may belong to a different owner. In this case, log in to Windows using the document owner's name and then delete the print data.
T
thomas10Sep 6, 2025
Why am I not getting print problem notifications from Xerox 4112 All in One Printer?
- M
  morrisjasonSep 6, 2025
  If you are not receiving notifications about printing problems with your Xerox All in One Printer, it could be due to the following reasons: * You might not be listed as a notification recipient on the print server. To fix this, add your user account or a group you are a member of to the Notification settings. * The Notify option might not have been specified when the print data was transmitted from the computer. Ensure that you specify the Notify option when transmitting print data.
B
Bryan ParkerSep 9, 2025
Why is the display dark on my Xerox 4112 All in One Printer?
- J
  Juan GeorgeSep 9, 2025
  If the display on your Xerox All in One Printer is dark, it might be due to the following reasons: * The machine might be in Power Saver mode. To cancel it, press the Power Saver button on the Control Panel. * The brightness dial might be set too low. Adjust the display brightness using the Brightness Dial.
A
Ashley JenkinsSep 13, 2025
Why can't my Xerox 4112 All in One Printer communicate with my computer?
- B
  Brian LeeSep 13, 2025
  If your Xerox All in One Printer can't communicate with your computer, it might be because they are using different protocols. To fix this, configure the machine and each computer to use the same SMB operational protocol. Another reason could be that the machine and computers belong to different networks (subnets). In this case, consult your network administrator. Finally, the host name for the machine might already be in use. Use the CentreWare Internet Services to change the host name to a unique name, or initialize the machine settings to the default settings.
M
Michael KelleySep 15, 2025
What to do if I am not notified when my Xerox 4112 job is complete?
- T
  Tommy WatkinsSep 16, 2025
  If you are not notified about the completion of your print job, it could be because the Notify option was not specified when the computer transmitted the print data. Make sure to specify the Notify option when transmitting the print data. Another reason could be that the Netware command CASTOFF has been issued on the computer. To resolve this, issue the NetWare command CASTON on the computer.