Xerox 4112 Quick Start Guide

Xerox 4112/4127 Copier/Printer Quick Start Guide
1-3
1. Introduction
Powering on and off
Switch on the power before operating the machine. The machine
warms up in approximately five minutes, after which you can make
copies. Switch off the machine at the end of the day or when it is
not in use for a long period of time.
Power on
To power on the machine:
1. Open the cover.
2. Press the power switch to the on position [
|].
NOTE: The "Please wait..." message on the UI indicates that the
machine is warming up. The machine cannot be used while it is
warming up.
Power off
1. Wait until all copy and print jobs have completely finished.
2. Press the power switch to the off position [ ].
9 Stop Temporarily stops the current job. Follow the message to cancel or resume
your job.
10 Start Starts the job.
11 Numeric Keypad Enter the number of copies, a password, and other numerical values.
12 Clear Deletes numeric values or the last digit entered.
13 Language Changes text to an alternative language.
14 Log In/Out Provides password protected access to the System Administration menu,
which is used to adjust the defaults on the machine.
15 Brightness dial Adjusts the brightness of the Touch screen.
No. Component Function

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English