Xerox AltaLink B8145 User Manual

LLooaaddiinngg tthhee EEnnvveellooppee TTrraayy
You can use the optional Envelope Tray in place of Tray 1. The Envelope Tray is a dedicated tray. For
supported envelope sizes, refer to Supported Paper.
Note: For information on installing the optional Envelope Tray, refer to the Hardware Install
and Setup Instructions that are included with the Envelope Tray kit.
To load the Envelope Tray:
1. Pull out the Envelope Tray until it stops.
2. Load the envelopes in the tray, face up with the flaps closed, and flaps toward the left.
Note: For 6 3/4 Envelopes and short-edge feed custom envelope sizes, load envelopes with
the flaps closed, and flaps toward the front.
3. Adjust the paper guides so that they rest lightly against the edges of the envelopes. Ensure that
the maximum fill line is visible or that there are no more than 50 envelopes loaded in the tray.
204
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
Paper and Media

Xerox AltaLink B8145 Specifications

General

Print Technology	Laser
Print Speed	Up to 45 ppm
Maximum Print Resolution	1200 x 2400 dpi
Automatic Duplexing	Yes
Scan Resolution	600 x 600 dpi
Control Panel	10.1-inch color touchscreen
Copy Resolution	600 x 600 dpi
Memory	4 GB
Scanner Type	Flatbed
Connectivity	Ethernet, USB, NFC
Functions	Print, Copy, Scan, Fax
Paper Sizes	A4, A5, B5, Legal, Letter
Hard Drive	320 GB
Mobile Printing	Apple AirPrint, Mopria, Xerox Print Service Plug-in for Android
Weight	80.6 kg