Xerox AltaLink B8145 User Manual

General Troubleshooting
This section contains procedures to help you locate and resolve problems. Resolve some problems by
simply restarting the printer.
RReessttaarrttiinngg tthhee PPrriinntteerr
The printer has two power switches. The main power switch, located behind the front door, controls
the main power to the printer. The secondary power switch is the Power/Wake button on the control
panel. The Power/Wake button controls power to the printer electronic components, and when
powered off, initiates a software-controlled shutdown. The preferred method to power on and off the
printer is to use the Power/Wake button.
To operate the printer, power on both switches:
1. Power on the main power switch.
2. At the control panel, press the Power/Wake button.
3. To restart the printer:
a. At the control panel, press the Power/Wake button, then touch Restart. A message appears
on the control panel that warns you that the printer is restarting.
b. If the printer does not restart after several minutes, open the front door, then power off the
main power switch. To restart the printer, power on the main switch, then press the Power/
Wake button on the control panel.
c. Close the front door.
If restarting the printer does not resolve the issue, see the table in this chapter that best describes the
problem.
268
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
Troubleshooting

Xerox AltaLink B8145 Specifications

General

Print Technology	Laser
Print Speed	Up to 45 ppm
Maximum Print Resolution	1200 x 2400 dpi
Automatic Duplexing	Yes
Scan Resolution	600 x 600 dpi
Control Panel	10.1-inch color touchscreen
Copy Resolution	600 x 600 dpi
Memory	4 GB
Scanner Type	Flatbed
Connectivity	Ethernet, USB, NFC
Functions	Print, Copy, Scan, Fax
Paper Sizes	A4, A5, B5, Legal, Letter
Hard Drive	320 GB
Mobile Printing	Apple AirPrint, Mopria, Xerox Print Service Plug-in for Android
Weight	80.6 kg