Xerox AltaLink B8145 User Manual

Probable Causes Solutions
The paper is moist from humidity. Remove the paper from the tray, and replace it with
new dry paper.
Too much static electricity is present.
• Try a new ream of paper.
• Do not fan transparencies before loading in tray.
Using unsupported paper. Use only Xerox approved paper. For details, refer to
Supported Paper.
Humidity is too high for coated paper. Feed paper one sheet at a time.
JJaammss iinn tthhee DDooccuummeenntt FFeeeeddeerr
Probable Causes Solutions
Unsupported paper of the wrong size, thickness, or
type.
Use only Xerox-approved paper. For details, see
Supported Paper.
Originals are torn, previously stapled, bent, or folded. Ensure that the originals are not torn, bent, or folded.
If previously stapled, remove all staples and separate
the sheets by fanning them.
The documents loaded in the document feeder
exceed the maximum capacity allowed.
Place fewer documents in the document feeder.
Improperly adjusted document feeder guides. Adjust the paper guides to fit snugly against the
paper loaded in the document feeder.
290
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
Troubleshooting

Xerox AltaLink B8145 Specifications

General

Print Technology	Laser
Print Speed	Up to 45 ppm
Maximum Print Resolution	1200 x 2400 dpi
Automatic Duplexing	Yes
Scan Resolution	600 x 600 dpi
Control Panel	10.1-inch color touchscreen
Copy Resolution	600 x 600 dpi
Memory	4 GB
Scanner Type	Flatbed
Connectivity	Ethernet, USB, NFC
Functions	Print, Copy, Scan, Fax
Paper Sizes	A4, A5, B5, Legal, Letter
Hard Drive	320 GB
Mobile Printing	Apple AirPrint, Mopria, Xerox Print Service Plug-in for Android
Weight	80.6 kg