Xerox AltaLink B8170 User Manual

LLooaaddiinngg tthhee EEnnvveellooppee TTrraayy
You can use the optional Envelope Tray in place of Tray 1. The Envelope Tray is a dedicated tray. For
supported envelope sizes, refer to Supported Paper.
Note: For information on installing the optional Envelope Tray, refer to the Hardware Install
and Setup Instructions that are included with the Envelope Tray kit.
To load the Envelope Tray:
1. Pull out the Envelope Tray until it stops.
2. Load the envelopes in the tray, face up with the flaps closed, and flaps toward the left.
Note: For 6 3/4 Envelopes and short-edge feed custom envelope sizes, load envelopes with
the flaps closed, and flaps toward the front.
3. Adjust the paper guides so that they rest lightly against the edges of the envelopes. Ensure that
the maximum fill line is visible or that there are no more than 50 envelopes loaded in the tray.
204
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
Paper and Media

Xerox AltaLink B8170 Specifications

General

Category	All in One Printer
Memory (Standard)	8 GB
Energy Star Certified	Yes
Functions	Print, Copy, Scan, Fax
Hard Drive	320 GB
Duplex Printing	Yes
Connectivity	Ethernet
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Network Connectivity	Ethernet
Operating System Compatibility	Linux
Print Speed (Black)	Up to 70 ppm
Copy Speed	Up to 70 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android, Mopria