4. Hold the tabs on both sides of the new staple cartridge and insert the cartridge into the original
position in the finisher.
Note: If you have trouble inserting the cartridge, ensure that the staples are positioned
correctly in the cartridge.
Note: The booklet maker uses two staple cartridges. Booklet stapling requires that both
staple cartridges contain staples.
5. Repeat the procedure for the other staple cartridge.
6. Close the finisher side cover.
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
253
Maintenance
To Next Page
Loading...
