Clearing Staple Jams in the Office Finisher
WARNING: Do not perform this procedure while the printer is printing.
1. Open the finisher front door.
2. Pull the stapler assembly toward you until it stops.
3. Push the stapler assembly to the right, as shown.
4. To remove the staple cartridge, grasp the orange handle, then pull the handle toward you.
5. Check inside the finisher for any loose staples, then remove the staples.
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
313
Troubleshooting
To Next Page
Loading...
