Xerox AltaLink B8170 User Manual

5. To remove the staple pack from the staple cartridge, press in the green tabs and pull back the
handle, then lift out the staple pack.
Note: If you do not see the staple jam, remove the staple case.
6. To remove the staple case, press the rear of the case as shown. Remove the jammed staples, then
return the staple case to the original position.
Note: If you cannot see the staple jam, open the staple cartridge clamp.
7. To open the staple cartridge clamp, pull the clamp firmly in the direction shown.
WARNING: The points of the jammed staples are sharp. Remove the jammed staples
carefully.
320
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
Troubleshooting

Xerox AltaLink B8170 Specifications

General

Category	All in One Printer
Memory (Standard)	8 GB
Energy Star Certified	Yes
Functions	Print, Copy, Scan, Fax
Hard Drive	320 GB
Duplex Printing	Yes
Connectivity	Ethernet
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Network Connectivity	Ethernet
Operating System Compatibility	Linux
Print Speed (Black)	Up to 70 ppm
Copy Speed	Up to 70 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android, Mopria