Xerox AltaLink C8070 User Manual

Xerox® Security Guide for Office Class Products: AltaLink®  VersaLink®
November 2018 Page 42
Controller Non-Volatile Storage
IC
HDD
SSD
SD Card
Required
Optional
N/A
N/A
Contains User Data (E.g. Print,
Scan, Fax)
Yes
Encryption Support
Always-On
NIST 800-171 Overwrite Support
Yes
Contains Configuration Settings
Yes
Yes
Encryption Support
Always-On
Always-On
Customer Erasable
Factory
Reset
Factory
Reset
Note: Configuration settings may be erased by the reset to factory defaults feature.
IC- Integrated Circuit, soldered to circuit board
HDD- Magnetic Hard Disk Drive
SSD- Solid State Disk
SD Card- Secure Digital Card
Controller Volatile Memory
Size
Type
Use
User
Data
How to Clear
Volatile
2GB
DDR3 DRAM
Executable code,
Printer control
data, temporary
storage of job data
Yes
Power off system
Yes
Additional Information: The controller operating system memory manager allocates memory
dynamically between OS, running processes, and temporary data which includes jobs in process.
When a job is complete, the memory pages in use are freed and reallocated as required by the OS.
Marking Engine Non-Volatile Storage
N/A. The marking engine does not contain any non-volatile storage.
Marking Engine Volatile Memory
N/A. The marking engine volatile memory does not store or process user data.

Xerox AltaLink C8070 Specifications

General

Category	Multifunction printer
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 1200 x 2400 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Maximum Paper Size	12 x 18 in. / SRA3
Memory	4 GB
Print Speed	70 ppm
First-page-out time, printing	3.7 seconds
Copy Speed	Up to 70 cpm
First-page-out time, copying	4.1 seconds
Hard Drive	250 GB
Connectivity	10/100/1000Base-T Ethernet, USB 3.0, NFC Tap-to-Pair
PDL	PCL 5/6, Adobe PostScript 3, PDF, XPS
Operating System Compatibility	Windows, Mac OS, Linux