Xerox AltaLink C8070 User Manual

Xerox® Security Guide for Office Class Products: AltaLink®  VersaLink®
November 2018 Page 6
2 Product Description
Physical Components
AltaLink® and VersaLink® products consist of an input document handler and scanner, marking engine,
controller, and user interface. A typical configuration is depicted below. Please note that options
including finishers, paper trays, document handers, etc. may vary configuration, however, they are not
relevant to security and are not discussed.
1. Stabilizer.
2. Bypass paper feed tray.
3. Front USB Port(s)*
4. Touch screen user interface.
5. Upper paper tray.
6. Lower paper tray.
7. Paper feed trays.
8. Caster wheels.
9. Rear USB Port(s)*
10. Optional Wi-Fi dongle port*
11. RJ45 Ethernet connection*
12. Service port
(May require disassembly to access).
13. AC Power.
*Denotes a security related component
Architecture
AltaLink® and VersaLink® products share a common architecture which is depicted below. The following
sections describe components in detail.
User
Interface
Scanner
Controller
Marking
Engine
External
Interfaces
Device
Storage
Optional
Interfaces

Xerox AltaLink C8070 Specifications

General

Category	Multifunction printer
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 1200 x 2400 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Maximum Paper Size	12 x 18 in. / SRA3
Memory	4 GB
Print Speed	70 ppm
First-page-out time, printing	3.7 seconds
Copy Speed	Up to 70 cpm
First-page-out time, copying	4.1 seconds
Hard Drive	250 GB
Connectivity	10/100/1000Base-T Ethernet, USB 3.0, NFC Tap-to-Pair
PDL	PCL 5/6, Adobe PostScript 3, PDF, XPS
Operating System Compatibility	Windows, Mac OS, Linux