6. To engage the fine-adjustment block, pinch the levers and slide the guides inward. The paper
guides move in increments of 1mm.
LLooaaddiinngg PPaappeerr iinn TTrraayyss 33 aanndd 44 ooff tthhee TTaannddeemm TTrraayy
MMoodduullee
The control panel displays a warning message when the paper in the tray is in short supply, or when a
tray is empty.
To change the paper size in Trays 3 and 4, refer to Configuring Trays 3 and 4 of the Tandem Tray
Module.
To load the paper in Trays 3 and 4 of the Tandem Tray Module:
1. Pull out the tray until it stops. Wait for the tray to lower and stop.
2. Fan the edges of the paper before you load it into the paper trays. The procedure separates any
sheets of paper that are stuck together and reduces the possibility of paper jams.
Note: To avoid paper jams and misfeeds, do not remove the packaging from the paper
until you are ready to use it.
220
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Paper and Media
To Next Page
Loading...
Need help?
General
