4. Load paper with the printable side facedown.
• Load letterhead with the printable side face down and the top
edge entering the printer first for one-sided printing
• Load letterhead with the printable side face up and the top
edge entering the printer last for two-sided printing
• Load envelopes with the flap side up and against the right
side of the paper guide
CAUTION—TIPPING HAZARD: Do not use envelopes
with stamps, clasps, snaps, windows, coated linings, or
self-stick adhesives.
5. From the control panel, set the paper size and paper type to
match the paper loaded.
LLooaaddiinngg tthhee MMaannuuaall FFeeeeddeerr
1. Adjust the guide to match the size of the paper that you are
loading.
2. Load a sheet of paper with the printable side facedown.
• Load letterhead with the printable side facedown and the top
edge entering the printer first for one-sided printing.
• Load letterhead with the printable side face up and the top
edge entering the printer last for two-sided printing.
• Load envelope with the flap side up and against the right side
of the paper guide.
11
To Next Page
Loading...
