PPaappeerr JJaamm iinn tthhee DDuupplleexx UUnniitt
1. Open door A.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
Warning—Potential Damage: To prevent damage from
electrostatic discharge, touch any exposed metal frame of
the printer before accessing or touching interior areas of
the printer.
2. Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3. Close door A.
PPaappeerr JJaamm iinn tthhee SSttaannddaarrdd OOuuttppuutt TTrraayy
1. Open door B until it clicks into place, and then remove the
jammed paper.
Warning—Potential Damage: To prevent damage from
electrostatic discharge, touch any exposed metal frame of
the printer before accessing or touching interior areas of
the printer.
Note: Make sure that all paper fragments are removed.
2. Open door A.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
3. Open the fuser access door, and then remove the jammed paper.
Note: Make sure that all paper fragments are removed.
4. Close doors A and B.
PPaappeerr JJaamm iinn tthhee MMuullttiippuurrppoossee FFeeeeddeerr
Note: The multipurpose feeder is available only in some
printer models.
16
To Next Page
Loading...
