1. Remove paper from the multipurpose feeder.
2. Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3. Flex, fan, and align the paper edges before loading.
4. Reload paper.
PPaappeerr JJaamm iinn tthhee MMaannuuaall FFeeeeddeerr
1. Remove the tray.
2. Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3. Insert the tray.
PPaappeerr JJaamm iinn DDoooorr CC
1. Remove all original documents from the ADF tray.
2. Open door C.
Warning—Potential Damage: To prevent damage from
electrostatic discharge, touch any exposed metal frame of
the printer before accessing or touching interior areas of
the printer.
3. Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
4. Close door C.
17
To Next Page
Loading...
