Detailed Specifications Xerox Color
®
C60/C70
Customer Expectation and Installation Guide 13
2-16 sheets / 8-64 page booklet
18 lb. bond to 24 lb. bond / 64 to 90gsm
C/Z Folder (Optional for BR Finisher and BR Finisher with Booklet Maker)
Folder option provide three different folds: C Fold, Z Fold and Z Half Fold
• Folding limited to 16-24 #/60-90gsm media only
• C Fold and Z Fold:
- Letter/ A4 paper sizes only
- Output destination to output tray only
- Envelope tray capacity- 30 sheets
• Z Half fold:
- Tabloid & A3 paper sizes only
- Output destination to stacker tray or top tray
Standard Finisher (appears as Light Production Finisher in some geographies; (Xerox Europe)
Top Tray will handle up to 500 sheets of 8.5”x11” / A4 20lb Bond/80 gsm uncoated or coated paper and
can accommodate up to 13”x19” / SRA3 size media 64-300gsm. (Note: heavier paperweight will result in
reduced output tray capacity).
Stacker output tray will handle up to 3,000 sheets of 8.5”x11” / A4 20lb Bond/80 gsm uncoated or coated
paper and can accommodate up to 13”x19” / SRA3 size media 64-300gsm. (Note: larger media will result
in reduced output tray capacity).
The Standard Finisher has a standard Interposer unit (used to insert pre-printed stock into finished sets w/o
having to go through engine) with the following specs:
Tray Capacity: 200 sheets of up to 128gsm
Paper Weights: 64 to 220gsm (HW2), Tab-1, holed paper.
Labels, coated media & envelopes are not supported
Supported Sizes: Letter L, Ledger, A3, A4 L, Legal/ 8.5x12.5/ 215x315, B5 S/Exec S, Letter S/
8x10 S, B5 L/ 8x10 L, Letter Cover L/ A4 Cover L, 11x15, B4 (1 sheet of up to 220gsm (HW2),
allowed for booklet cover)
Optional C/Z folding unit enables C/Z folding of media up to 24 lb (90 gsm).
System must be interrupted to remove paper from the optional C/Z folding tray.
Optional C/Z folding tray can accommodate at least 30 sheets of 24 lb (90 gsm) uncoated media).
Supported Paper sizes are 8.5x11” (A4) SEF.
11” x17” paper can be half-Z-folded and delivered to the Top or Stack trays.
Requires the Interface Module
Requires an additional electrical receptacle (see Electrical Requirements section)
18 lb. bond to 110 lb. cover / 64 to 300 gsm
1- and 2-place stapling of up to 100 sheets of 20lb Bond/80 gsm uncoated or 5 sheets coated paper with100
sheets available to the Stacker tray.
Quad stitch stapling available through EFI (stand alone and bustled), and FFPS bustled DFE’s only; for
8.5x11/A4, 11x17/A3
2-3 Hole Punch
2-4 Hole Punch
Swedish Hole Punch
Booklet Maker Finisher (appears as Light Production Finisher with Booklet Maker or Light Production Finisher with Booklet Maker
and Folder in some geographies; (Xerox Europe)
Top Tray will handle up to 500 sheets of 8.5”x11” / A4 20lb Bond/80 gsm uncoated or coated paper and can
accommodate up to 13”x19” / SRA3 size media 64-300gsm. (Note: heavier paperweight will result in reduced
output tray capacity).
Stacker output tray will handle up to 2,000 sheets of 8.5”x11” / A4 20lb Bond/80 gsm uncoated or coated
paper and can accommodate up to 13”x19” / SRA3 size media 64-300gsm. (Note: larger media will result in
reduced output tray capacity).
Optional C/Z folding unit enables C/Z folding of media up to 24 lb (90 gsm).
System must be interrupted to remove paper from the optional C/Z folding tray.
Optional C/Z folding tray can accommodate at least 30 sheets of 24 lb (90 gsm) media). Supported Paper
sizes are 8.5x11” (A4) SEF.
11” x17” paper can be half-Z-folded and delivered to the Top or Stack tray
To Next Page
Loading...
Need help?
General
