Xerox D110

2. Press the Machine Status button.
3. Select Machine Information.
4. Select Printer Reports.
5. Select Copy Reports.
6. Select Configuration Report.
7. Press the Start button.
The Configuration Report prints.
8. Select Close until you get to the Machine Information tab.
9. Log off as the administrator.
Configuring Scan Service Settings
1. Select System Settings > Scan Service Settings.
2. Select your preferences from the following options:
• Screen Defaults
• Scan Defaults
• Scan to PC Defaults
• Original Size Defaults
• Output Size Defaults
• Reduce/Enlarge Presets
• Preset Buttons
• Other Settings
Xerox
®
D95/D110/D125/D136 Copier/Printer5-18
System Administration Guide
Using the Scan Service