What to do if Tray 5 (Bypass) printing failed on my Xerox Copier?
If the Tray 5 (Bypass) printing failed on your Xerox Copier, follow the instructions displayed to load paper of the correct size and try printing again.
What to do if Tray 5 (Bypass) printing failed on Xerox Printer?
If printing from Tray 5 (Bypass) fails, follow the displayed instructions to load the correct paper size and try printing again.
Why do documents jam often in my Xerox Copier?
If documents jam often in your Xerox Copier, make sure the document feeder is loaded properly with acceptable media. Remove any sticky labels, paper clips, or tape from the documents. Properly set the document guides. Open the document feeder cover and check for pieces of paper. Set Mixed Size Originals to ON. Load the A5-size document vertically.
How to adjust the Xerox Copier if copies are not made at the desired size?
If copies from your Xerox Copier are not made at the desired size, clean the document feeder glass or the document cover. Place the document on the document glass with a white sheet of paper on top before copying. Ensure the document is loaded correctly, the document guides are properly set, and the document is straightened. Also, enter the correct document size.
What to do if a corner of the document is folded in Xerox Printer?
If a corner of the document is folded, flatten out the curl and load the document again.
What to do if a corner of the document is folded in my Xerox Copier?
If a corner of the document is folded when using your Xerox Copier, flatten out the curl and load the document again.
How to solve error message after loading paper in paper Tray 5 (Bypass) on Xerox D125?
If you receive an error message after loading paper in Tray 5 (Bypass) and pressing Start, make sure the paper guides are set to the correct positions.
What to do if Xerox D125 online indicator does not light?
If the online indicator doesn't light up when you try to print, turn the power off, unplug the power cord, and check the interface cable connection. Also, check the print driver and environment settings on your computer.
Why is my Xerox D125 Printer unable to print or copy?
If you're unable to print or copy, first follow any instructions displayed on the printer's screen. Next, press the Machine Status button and select Online from the Printer Mode. If the issue persists, turn the power switch off, firmly plug in the power cord, and then turn the power switch back on.
How to turn on Xerox Printer if power is not switched on?
If the power is not on, first, ensure the power switch is turned on. If it still doesn't power on, turn the power switch off, then firmly plug in the power cord before turning the power switch back on. Also, confirm that the power supply is within the range of 200-240 V and 15 A, and that the power capacity is compatible with the printer's maximum power consumption of 2.8-3.1 KVA.
General| Print Speed | Up to 125 ppm |
|---|---|
| Print Resolution | 2400 x 2400 dpi |
| Standard Paper Capacity | 4, 050 sheets |
| Maximum Paper Capacity | 8, 050 sheets |
| Connectivity | Ethernet, USB |
| Duplex Printing | Standard |
To Next Page