38
Xerox
®
D95/D110/D125 Copier/Printer Security Function Supplementary Guide
Job Deletion by System Administrator
This feature allows only system administrators to delete the active jobs.
Deleting the Copy, Scan job
1. Press the red [Stop] button on the control panel.
2. On the touch screen, touch [Resume] to continue the job, or touch [Cancel] to cancel the
job completely.
Deleting the printing Job
1. On the control panel, press [Job Status] button. The Active Jobs tab displays.
2. Touch the desired job, then press the Delete from the pop up menu.
3. A confirmation window appears. Select [Delete job] to cancel the job completely.
Deleting the sending Scan Job.
1. On the control panel, press [Job Status] button. The Active Jobs tab displays.
2. Touch the desired job, then press [Delete] from the pop up menu.
Folder / Stored File Settings
This section describes the features that allow a System Administrator to configure various
settings for Folder that is created for saving confidential scanned files.
Folder Service Settings
This feature allows you to specify whether to discard files once received from a client.
1. Select [Folder Service Settings] under [System Settings].
2. Change the required settings.
3. Select [Close].
Files Retrieved By Client
Specifies when and how to delete files in Folder after they are retrieved.
Print & Delete Confirmation Screen
Specifies whether to display a confirmation message screen when deleting a file.
Quality/File Size for Retrieval
Specifies the Quality/File Size level.
To Next Page
Loading...
Need help?
General