Page 24
Part Number: 45045321
Acrobat 7.0 not supported
The Remote Scan TWAIN plug-in is supported in Acrobat 6.0, but not in Acrobat 7.0.
You can also use Remote Scan and WebScan to retrieve scans.
Default Mailboxes/Job Templates
The following default Mailboxes/Job Templates are predefined on the copier: (ColorCal),
(InternetFax), (color), (bw), (grayscale).
Mailbox/Job Template naming
When you retrieve a scan using Remote Scan or WebScan, for the default templates (color),
(bw), and (grayscale), enter 0 as the mailbox name. For the (InternetFax) template, enter
InternetFax as the mailbox name. Default templates have no passwords (leave blank).
When you create a Mailbox/Job Template, use only uppercase letters (A-Z) and numerals
(0-9). When you retrieve a scan using a user-defined template, enter the name, using only
uppercase letters and numerals. If you enter the name using lowercase letters, you can log on
to the mailbox, but cannot view any scan jobs.
Mailbox/Job Template display order
User-defined templates are listed in ASCII order. The default templates are always listed
before any user-defined templates.
Scan to FTP not supported for all FTP servers
Scan to FTP is not supported for all FTP servers. If an FTP server does not reply to a NLST
command with a 4xx or 5xx response, scan to FTP from the Fiery does not work correctly.
The WS_FTP server is known to have this issue.
Check Scanner message
If a message appears in Command WorkStation that says to “check scanner power and cable,”
check the link light on the crossover cable connecting the Fiery to the copier. If it is not lit
(green), try replacing the cable.
To Next Page
Loading...
Need help?
General
