DocuMate 262i Scanner User’s Guide 5
Installation
Step 1: Assemble the Scanner
1. Remove all shipping tape from the top and bottom of the scanner.
2. Carefully remove the protective foam from the ADF cover release,
then press the release and open the Automatic Document Feeder
cover.
3. Carefully remove any foam particles that may have gotten inside the
document feeder, and close the cover.
4. Align the slots on the paper guide with the ridges on the scanner and
slide it down until it snaps into place.
5. Select either the Front Feed with Output Tray or the standard Output
Tray.
6. Insert the pins on each side of the output tray into the holes on the
scanner.
To Next Page
Loading...
