DocuMate 262i Scanner User’s Guide 21
Scanning
Load and Scan Items from the Front Feed Tray
You can scan thick paper, embossed plastic cards, business cards and
other items from the scanner’s front feed tray. Please see the “Xerox
DocuMate 262i Scanner Specifications” on page 93 for details of the
Front Feed scanning specifications.
Scan With the Front Feed Tray Up
1. Adjust the paper guides for the width of the item you are scanning.
2. Place a single item face up, with the top pointing into the scanner,
between the paper guides on the front feed tray.
3. Press down on the tray and guide the item to the front of the scanner.
4. The scanner pulls the item in from the front and the front feed tray
springs back up.
NOTE: Do not attempt to load documents into the input tray while you
have an item in the scanner fed in from the front. You can only load
items into the scanner from either the Front Feed tray or the input tray
at each scan time. The scanner will jam if you load paper into the input
tray after an item has already been fed into the front.
To Next Page
Need help?
General