Xerox DocuMate 262i User Manual

Scanning with the ISIS Interface
84 DocuMate 262i Scanner User’s Guide
Scanning with the ISIS
Interface
You can use the ISIS interface from QuickScan or any other application
that will access the ISIS driver. Note that the ISIS interface for each
application varies depending on the application. Please refer to that
software application’s User Guide for instructions on scanning with the
ISIS interface.
Accessing the ISIS interface in QuickScan
Open the QuickScan software to access the ISIS driver scanning options.
Please note that you may see the following warning message:
1. Please disregard this message and click Continue.
The Pixel Translations ISIS drivers were installed correctly during the
installation of your Xerox DocuMate 262i scanner.
The Scanner Selection dialog box will then open.
2. Select Xerox DocuMate 262i from the list of scanners and click OK.
Your scanner is then ready to work with the QuickScan ISIS driver.

Xerox DocuMate 262i Specifications

General

Brand	Xerox
Model	DocuMate 262i
Category	Scanner
Language	English