Scanning
24 DocuMate 262i Scanner User’s Guide
To Scan with the Front Feed Tray Down:
1. Adjust the paper guides for the width of the item you are scanning.
2. Place a single item face up, with the top pointing into the scanner,
between the paper guides on the front feed tray.
3. The scanner pulls the item in from the front.
4. Check the LED number to make sure you’re using the scan setting
you want.
Press the Destination Selector to cycle
through the scan settings to select the
one you want.
The current scan setting.
To Next Page
Loading...
Need help?
General