DocuMate 632 Scanner User’s Guide 23
Scanning
3. Check the LED number to make sure you are using the scan
setting you want.
To choose a new scan setting, press the Up or Down
Destination Selector buttons.
4. To scan a one-sided document, press the Simplex button.
To scan a two-sided document, press the Duplex button.
A scan progress window opens and the image is sent to the
selected application from the One Touch utility.
To Cancel scanning, click the Cancel button.
Press the Up or Down Destination
Selectors to cycle through the scan
settings to select the one you want.
The current scan setting. See “Check
the Scan Settings Before Scanning”
on page 24 to check the settings.
To Next Page
Loading...
