Xerox DocuMate 632 - Adjusting the Image with the Advanced Interface

DocuMate 632 Scanner User’s Guide 89
Scanning with the TWAIN Interface
Adjusting the Image with the Advanced Interface
You can adjust the scan settings on the Advanced Interface to
produce the best possible image for the documents you’re
scanning.
To adjust a setting:
1. On the left side of the Advanced Interface, select a
configuration, for example, Color Configurations.
2. Click a setting in the list of settings, or click its corresponding
button on the right side of the Advanced Interface.
NOTE: The information in the scan settings list and the options
you select on the various settings panels are interactive. As you
change the settings on the panel, the numbers in the list on the left
also change.
Resolution
Brightness/Contrast
Color (Gamma,
Saturation, and Hue)
Scan Size
NOTE: The list of scan settings for a configuration applies only
to that type of configuration. For example, the Black&White
Configuration does not have a setting for adjusting the Color
Hue.