24 1 Printer Environment Settings
To Set the Subnet Mask/Gateway Address
17. Press the < > button until [Subnet Mask]
is displayed.
18. Press the < > or <Eject/Set> button to
accept the selection.
The current subnet mask is displayed.
19. Enter the subnet mask in the same way you
entered the IP address, and press the
<Eject/Set> button to confirm your entry.
20. Press the < > button to return to [Subnet
Mask].
21. Press the < > button to display [Gateway
Address].
22. Press the < > or <Eject/Set> button to
accept the selection.
The current gateway address is displayed.
23. Enter the gateway address in the same way
you entered the IP address, and press the
<Eject/Set> button to confirm your entry.
24. The setting is now complete.
Reboot the printer by switching the power
off and then on again.
25. Print the [Printer Settings] list to verify your
settings.
IPv4
Subnet Mask
Subnet Mask
000.000.000.000*
Subnet Mask
255.255.255.000*
IPv4
Subnet Mask
IPv4
Gateway Address
Gateway Address
000.000.000.000*
Gateway Address
192.168.001.254*
To Next Page
Loading...
