Maintenance Xerox
®
Duplex Portable Scanner
User Guide 35
7. Close the scanner when you’re finished.
Replacing the Feed Roller
The roller will wear out and is designed to be a user-replaceable part. A worn roller can cause
documents to feed in skewed at an angle, or multiple pages to feed at the same time. Before
replacing the roller you should clean it as excessive dust on the roller will make it appear worn and
smooth. You cannot properly diagnose a worn roller until you have cleaned it. You should generally
replace the roller every 100,000 scans.
Replacement parts can be purchased from the Parts & Accessories page for your scanner at
www.xeroxscanners.com
.
1. Ensure the front feed tray is closed and open the Automatic Document Feeder cover.
To Next Page
Loading...
Need help?
General