6. Load paper in the tray. Position the paper against the left side of the tray.
• For long-edge feed, insert letterhead and pre-printed paper face down with the top edge
toward the front of the tray. Load hole-punched paper with the holes to the left.
• For short-edge feed, insert letterhead and pre-printed paper face down with the top edge to
the left. Load hole-punched paper with the holes toward the rear of the printer.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the
printer to jam.
7. Adjust the length and width guides until they touch the edges of the paper.
190
Xerox
®
EC8036/EC8056 Color Multifunction Printer
User Guide
Paper and Media
To Next Page
Loading...
Need help?
General
