3. Load the labels in the tray:
• For long-edge feed, load labels face down with the top edge toward the front of the tray.
• For short-edge feed, load labels face down with the top edge to the left.
Note:
• Do not load paper above the maximum fill line. Overfilling the tray can cause the
printer to jam.
• Do not print on label media after a label has been removed from a sheet.
• To avoid jams and misfeeds, do not remove paper from its packaging until you are
ready to use it.
4. Adjust the width guides until they touch the edges of the paper.
206
Xerox
®
EC8036/EC8056 Color Multifunction Printer
User Guide
Paper and Media
To Next Page
Loading...
