2. If the staple cartridges are not visible, grip the vertical panels at the left and right of the opening
and slide them to the center.
3. Hold the tabs on both sides of the staple cartridge and pull the cartridge out of the finisher.
4. Hold the tabs on both sides of the new staple cartridge and insert it into the original position in
the finisher.
Note: If you have trouble inserting the cartridge, ensure that the staples are positioned
correctly in the cartridge.
Note: The booklet maker uses two staple cartridges. Booklet stapling requires that both
staple cartridges contain staples.
5. Repeat the procedure for the other staple cartridge.
6. Close the finisher side cover.
236
Xerox
®
EC8036/EC8056 Color Multifunction Printer
User Guide
Maintenance
To Next Page
Loading...
