1. Open the front door of the Business Ready finisher.
2. Remove the hole-punch waste container from its slot near the top left of the finisher.
Note:
• When you remove the hole punch waste container, wait 10 seconds before you reinsert
it into the printer. The hole punch counter resets after 10 seconds.
• If you remove the hole punch waste container before the device instructs you to, empty
the container before you reinsert it into the finisher.
3. Empty the container.
244
Xerox
®
EC8036/EC8056 Color Multifunction Printer
User Guide
Maintenance
To Next Page
Loading...
