2. To remove the staple cartridge, grasp the orange handle, then pull it firmly toward you.
3. Check inside the finisher for any loose staples and remove them.
4. Pull the staple cartridge clamp firmly in the direction shown to open it.
5. Remove the jammed staples, then push the clamp in the direction shown until it snaps into the
locked position.
WARNING: The points of the jammed staples are sharp. Remove the jammed staples
carefully.
294
Xerox
®
EC8036/EC8056 Color Multifunction Printer
User Guide
Troubleshooting
To Next Page
Loading...
