2. Grasp the booklet maker handle and pull the unit toward you until the staple cartridges appear
on the top edge of the device.
3. To remove a staple cartridge from the booklet maker, push down on the staple cartridge handle,
as shown, then pull the cartridge out and up.
4. Turn over the staple cartridge.
5. To permit the staple cartridge handle to open out and away from the staple pack, press in the
green tabs, then pull back the handle.
Note: If you do not see the staple jam, remove the staple case.
302
Xerox
®
EC8036/EC8056 Color Multifunction Printer
User Guide
Troubleshooting
To Next Page
Loading...
