Xerox Phaser 3160B User Manual

Management tools_48
USING THE UNIFIED LINUX DRIVER
CONFIGURATOR
The supplied software CD provides you with the Unified Linux Driver
package for using your machine with a Linux computer.
Unified Linux Driver Configurator is a tool primarily intended for configuring
machine devices.
After the driver is installed on your Linux system, the Unified Linux Driver
Configurator icon will automatically be created on your desktop.
Opening the Unified Driver Configurator
1. Double-click the Unified Driver Configurator on the desktop.
You can also click the Startup Menu icon and select Xerox Unified
Driver > Unified Driver Configurator.
2. Click each button on the left to switch to the corresponding configuration
window.
To use the on screen help, click Help.
3. After changing the configurations, click Exit to close the Unified Driver
Configurator.
Printers configuration
Printers configuration has the two tabs: Printers and Classes.
Printers tab
View the current system’s printer configuration by clicking on the
machine icon button on the left side of the Unified Driver Configurator
window.
The printer control buttons are, as follows:
• Refresh: Renews the available machines list.
• Add Printer: Allows you to add a new machines.
• Remove Printer: Removes the selected machine.
• Set as Default: Sets the current selected machine as a default
machine.
• Stop/Start: Stops/starts the machine.
• Test: Allows you to print a test page to ensure the machine is
working properly.
• Properties: Allows you to view and change the printer properties.
1 Printers
Configuration
2 Ports
Configuration
1
Switches to Printers configuration.
2
Shows all of the installed machine.
3
Shows the status, model name and URI of your machine.

Xerox Phaser 3160B Specifications

General

Brand	Xerox
Model	Phaser 3160B
Category	Printer
Language	English