Xerox Phaser 4510 - Page 11

Phaser® 4510 Laser Printer
1-6
To select booklet printing in a supported driver:
Operating System Steps
Windows 2000 or later 1. Select the Layout/Watermark tab.
2. Select the Booklet Layout option.
If you are using the PostScript driver, click the Booklet Options
button to specify the creep and gutter.
3. If desired, select Draw Page Borders from the drop-down lists.
Mac OS X (version 10.2
and higher)
1. In the Finishing Options dialog box, select Enable Booklet
Printing.
2. If desired, specify the creep and gutter.
3. If desired, specify the paper size from the Target Paper Size
drop-down list.