Xerox Phaser 4510 - Macintosh; Requirements; Quick CD-ROM Install Steps; Enabling or Using TCP;IP or Appletalk for Mac os X, Version 10.2 and Higher

Macintosh
Phaser® 4510 Laser Printer
3-11
Macintosh
This section includes:
■ Requirements on page 3-11
■ Quick CD-ROM Install Steps on page 3-11
■ Enabling or Using TCP/IP or AppleTalk for Mac OS X, Version 10.2 and Higher on
page 3-12
■ Macintosh Troubleshooting (Mac OS X, Version 10.2 and Higher) on page 3-14
Requirements
■ A workstation with the appropriate printer driver installed.
■ A working knowledge of the operating system, Mac OS X, version 10.2 or higher, being
used on the workstation.
■ Proper cabling to connect the printer to the network.
Quick CD-ROM Install Steps
To use the quick CD-ROM installation option:
1. Insert the Software and Documentation CD-ROM into the computer’s CD-ROM drive.
2. Double-click the installer on the Software and Documentation CD-ROM to install the
printer driver.