Xerox PHASER 5400 - Page 76

60 Xerox Phaser 5400 Laser Printer
Troubleshooting
Symptom: Wrinkled prints
The prints are wrinkled, creased, or torn.
Symptom: Blurred prints
The image is blurred at the edges.
Possible causes and solutions:
 The paper stock may be in poor condition.
Replace the paper stock.
 The paper stock may be damp. Replace the
paper stock.
 The fuser may be at the end of its life. Replace
the fuser (contained in the Maintenance Kit).
Possible causes and solutions:
 The paper stock may be in poor condition.
Replace the paper stock.
 The paper stock may be damp. Replace the
paper stock.
3925-69
3925-70