Xerox Phaser 6180 - Page 103

Description of Menu Items
Phaser® 6180 Color Laser Printer
5-15
Control Panel
Specifies whether to limit menu operations with a password to avoid changing the printer
settings by accident.
Line Termination Sets the line termination.
■ Off (default)
The line termination command is not added.
CR=CR, LF=LF, FF=FF
■ Add-LF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
■ Add-CR
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
■ CR-XX
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Output Color Specifies the color mode to Color or Black. This settings is used when the color
printing mode setting is not specified for the print job that is sent to the printer.
■ Black (default)
Prints in black and white mode.
■ Color
Prints is the color mode.
Item Description
Panel Lock Specifies whether to limit the menu operations with a password. Selecting
On requires the operator to enter the password. If On is set, then you must
enter the password to use the Admin Menu. The default is Off.
Item Description