Description of Menu Items
Phaser® 6180 Color Laser Printer
5-4
Description of Menu Items
This section includes:
■ Tray Settings on page 5-4
■ Information Pages on page 5-6
■ Billing Meters on page 5-7
■ Admin Menu on page 5-7
Tray Settings
There are three submenus under the Tray Settings menu: Tray 1 (MPT), Tray 2, and Tray 3.
You can set paper size and paper type for each tray under these menus. (Display Pop-up and
MPT Mode can only be set for Tray 1 (MPT).)
Tray 3 is displayed only when the optional sheet feeder is installed.
The settings menu for Tray 1 (MPT) is displayed only when the MPT Mode is set to Panel
Specified.
Common Settings for Tray 1 (MPT), Tray 2, and Tray 3
Item Description
Paper Type Specifies the type of paper loaded in each tray.
■ Tray 1 (MPT) (default: Thin Card Stock)
■ Tray 2 (default: Plain)
■ Tray 3 (default: Plain)
For details, refer to Setting Paper Types and Sizes on page 4-7.
Paper Size Specify the paper size and orientation for each tray.
■ Tray 1 (MPT) (default:Driver Size)
■ Tray 2 (default: Auto)
■ Tray 3 (default: Auto)
For details, refer to Setting Paper Types on page 4-7.
To Next Page
Loading...
