Loading Paper
Phaser® 6180 Color Laser Printer
4-11
3. Insert all media facedown and top edge first into Tray 1 (MPT).
Note: Do not force the paper.
4. Slide the width guides until they rest lightly against the edge of the paper stack.
Note: Be careful not to bend the paper.
If Tray 1 (MPT) is configured for DriverSpecified, configure the paper size and type in the
print driver.
When MPT Mode is set to Panel Specified, you need to set the paper type and size settings
for the tray on the control panel in advance.
See also:
Setting Paper Types and Sizes on page 4-7
6180-011
6180-020
To Next Page
Loading...
