Printing on Specialty Media
Phaser® 6180 Color Laser Printer
4-38
5. If necessary, press the paper guides inward to fit the paper.
Note: When the paper guides are adjusted correctly, there may be a small space between
the paper and the guides.
6. Insert the tray into the tray slot, and push the tray completely into the printer.
7. On the control panel, select the glossy paper type:
a. Select
Tray Settings, and then press the OK button.
b. Select
Tray 2 or Tray 3, and then press the OK button.
c. Select
Paper Type, and then press the OK button.
d. Select
Glossy Paper, and then press the OK button.
8. In the printer driver, select either Glossy Paper as the paper type or the appropriate tray as
the paper tray.
6180-016
6180-017
To Next Page
Loading...
