Xerox Phaser 7500DN - Print Density Is Uneven

Troubleshooting
Phaser 7500 Color Printer
User Guide
136
Print Density is Uneven
Probable Causes Solutions
One or more of the toner cartridges may be defective
or low.
Remove the toner cartridges and check for damage.
If it is damaged, replace it.
One or more of the imaging units may be defective. Remove the imaging units one at a time, and check
for damage. If it is damaged, replace it.
The printer is not level. Place the printer on a flat, hard, level surface.