Troubleshooting
Phaser 7500 Color Printer
User Guide
138
Ink Rubs Off After Printing
Toner Smudges and Residual Images Print
Probable Causes Solutions
The media is moist from humidity. Remove the moist media and replace it with new, dry
media.
Unsupported media (wrong size, thickness, type, etc.)
is being used.
Use Xerox-approved media. See Supported Media on
page 55.
Media type is set incorrectly. When printing envelopes, labels, heavyweight stock,
or transparencies, specify the appropriate media type
in the printer driver.
Probable Causes Solutions
Unsupported media (wrong size, thickness, type, etc.)
is being used.
Use Xerox-approved media. See Supported Media on
page 55.
Media type is set incorrectly. When printing envelopes, labels, heavyweight stock,
or transparencies, specify the appropriate media type
in the printer driver.