Xerox Phaser 7500DN - Print Is Irregular or Mottled

Troubleshooting
Phaser 7500 Color Printer
User Guide
137
Print is Irregular or Mottled
Probable Causes Solutions
The media is moist from humidity. Remove the moist media and replace it with new, dry
media.
Unsupported media (wrong size, thickness, type, etc.)
is being used.
Use Xerox-approved media. See Supported Media on
page 55.
One or more of the toner cartridges may be defective. Remove the toner cartridges and check each for
damage. If it is damaged, replace it.
One or more of the imaging units may be defective. Remove the imaging units one at a time, and check
for damage. If it is damaged, replace it.