Advanced Features and Troubleshooting Manual 7
Advanced Features
N-up
When printing a multiple-page document, you can choose to print more than one page on
a single sheet of paper. You can choose to print one, two, four, six, nine, or 16 pages per
sheet. When you print more than one page on a sheet, you can also print a border around
each page.
You can select N-up in a supported driver:
■
Windows 95 / Windows 98 PostScript driver:
On the Setup tab, click the More Layout Options button, then choose the number of
pages per sheet from the drop-down list.
■
Windows 2000 driver:
On the Layout tab, choose the number of pages per sheet from the drop-down list.
■
Windows NT driver:
From the Properties tab, select the Advanced tab. Under Document Options, select
the desired Page Layout (N-up) Option.
■
LaserWriter 8.6 or 8.7 driver:
In the Print dialog box, select the Layout pull-down menu, then select the number of
pages per sheet.
Booklet printing
You can print a document in the form of a small book. The printer automatically reduces
each page image by 50 percent and prints two pages per sheet of paper. The pages are
printed in the correct order so that you can fold and staple the pages to create a booklet.
Note
You can create booklets for any paper size that is supported for 2-sided (duplex)
printing.
To Next Page
Loading...
Need help?
General